Product Description
Drydene Gearall MP 85w140 Gear Oil GL-5- 1 Quart
DRYDENE GEARALL® MP GL-5 GEAR OILS are designed for use in a wide range of applications where conventional GL-5 fluids are recommended:
- On-highway passenger vehicles, heavy-duty trucks and buses, agricultural and farming equipment
- Recommended for hypoid and bevel gears found in many rear and front differentials
- Suitable for use in manual transmissions where GL-5 fluids are specified
- May be used for service fills, top-off and refills in hypoid and other drive axles specifying API GL-5 gear oils
*Can be used for as a top-off fluid in limited slip systems but not intended for filling or refilling applications.
DRYDENE GEARALL® MP 85W-140 GL-5 OIL is blended to a unique formulation optimized to provide excellent service in all key performance areas:
- Superior torque and load handling capacity
- Helps prevent gear chatter and slippage
- Exceptional protection against thermal and oxidative degradation
- Robust additives help prevent foaming, rust, corrosion and micro-pitting
- Consistent performance in cold and hot operating environments
Meets or exceeds:
• API GL-5, MT-1
• SAE J-2360
• MIL-PRF-2105E
• Ford WSP-M2C197-A
• Meritor Automotive 0-76-A
• Navistar B-22, PG-2
• Mack GO-J
• MAN 342 Type M1
| PROPERTY | TEST METHOD | SAE 85W-140 |
| Viscosity @ 40°C, cSt | ASTM D445 | 375.0 |
| Viscosity @ 100°C, cSt | ASTM D445 | 26.5 |
| Viscosity Index | ASTM D2270 | 95 |
| Pour Point, °C | ASTM D97 | -15 |
| Channel Point, °C | FTM 3456 | -263 |
| Rust Test | ASTM D665 | Pass |
| Copper Strip Corrosion | ASTM D130 | 1b |
| Brookfield Viscosity, cP @ | ASTM D2983 | 60,000 (-12) |
