Description
DRYDENE RETRAPLEX® ONYX 5% MOLY EP 2
DRYDENE RETRAPLEX® ONYX 5% MOLY EP 2 is a severe-duty lithium complex grease fortified with extreme pressure, load protecting and tackifying additives to provide extended protection to off-road, construction, mining and agricultural equipment that require extended shock loading protection.
DRYDENE RETRAPLEX® ONYX 5% MOLY EP 2 provides maximum protection to critical equipment components with its chemically superior additives that ensure consistent, extended service under the most several operating conditions:
- Molybdenum Disulfide (5%) help reduce meta-on-metal friction and carry excess loading on moving and non-moving parts.
 - High dropping point helps the grease maintain its performance even at excessively high operating temperatures.
 - Severe duty EP and anti-wear additives provide extended service to protect equipment and reduce maintenance costs over the life of the unit.
 - Ideal for use where protection from water washout and water spray-off may be a factor.
 - Provides excellent pumpability in automatic delivery systems both air and electric.
 
DRYDENE RETRAPLEX® ONYX 5% MOLY EP 2 is designed for use in a wide array of off-road and industrial applications across where heavy shock loading and excessive friction may occur:
- Construction equipment
 - Surface and underground mining implements
 - Agriculture machinery
 - Off-highway trucks and loaders
 
RETRAPLEX® ONYX 5% MOLY EP 2 is very well suited for the following implement-specific applications:
- King pins
 - Bucket and pivot pins
 - Ball joints
 - Crusher bearings
 - Anti-Friction bearings
 - Bucket bushings
 - Shovels
 - Shaker screens
 - Aggregate conveyor systems
 - Fifth wheels
 - Power takeoff shafts
 
| PROPERTY | TEST METHOD | Onyx EP 2 | 
| NGLI Grade | 2 | |
| Thickener Type | ASTM D128 | Lithium Complex | 
| Color | Visual | Gray | 
| Appearance | Visual | Smooth | 
| Penetration @ 77°F, 60 Strokes | ASTM D217 | 265 – 295 | 
| Dropping Point, °F | ASTM D2265 | 525 min | 
| Base Oil Viscosity, cSt @ 40°C | ASTM D445 | 340 – 360 | 
| Timken OK Load, lbs | ASTM D2509 | 55 | 
| Viscosity Index | ASTM D2270 | 90 min | 
| Four Ball EP Weld Point, kg | ASTM D2596 | 620 min, 800 typical | 
| Four Ball EP Load Wear Index | ASTM D2596 | 98 | 
| Four Ball Wear Scar, mm | ASTM D2266 | 0.5 | 
| Moly Content | ASTM D128 | 5.0 | 
| Water Washout @ 175°F | ASTM 1264 | 1.1 | 
| Water Sprayoff, % loss | ASTM D4049 | 18 | 
Warranty Information