Product Description
Seymour Big Rig Heavy-Duty Industrial Enamel- Fleet Red (16 oz) 20-1623
Big Rig enamels offer superior high solids coverage for fleet maintenance applications where maximum performance is required. It will not blister, flake, or crack. Prevents rust and corrosion while resisting heat, oil, gas, and abrasion.
- Ideal for vehicles frames, engine blocks, protecting metal structures and restoring equipment
- Resists heat, oil, gas, abrasions, and rust
- Protects and does not flake, blister or crack
- Comes in a wide variety of colors
Big Rig Professional Coatings Big Rig enamels offer superior high solids coverage for fleet maintenance applications where maximum performance is required. Will not blister, flake, or crack. Prevents rust and corrosion while resisting heat, oil, gas, and abrasion. Available in many popular colors. For maximum protection, prime bare or rusted metal surfaces with Big Rig Red Oxide (#20-1607) or Light Gray Primer (#20-1631).
Suggested Uses: school buses vehicle frames engine blocks restore parts
Properties: Coverage Up to 18 square feet Cleanup Lacquer thinner/paint thinner Flash point -4F Specific Gravity 0.86 Solids Content 33% MIR value high gloss colors: 0.77, cannot exceed 0.95 MIR value Gray bumper: 1.37, cannot exceed 1.70 MIR value Cast Blast: 1.19, cannot exceed 1.25 MIR value Aluminum: 1.09, cannot exceed 1.25 Storage Temperature 40-100F Application Temperature 50-90F Abrasion Resistance Excellent Gasoline Resistance Yes (Cast Blast is not) Heat Resistance 300F Resin System Enamels—alkyd Cast Blast—acrylic Shelf life Guaranteed for 2 years
Dry Time*: To touch 30 minutes To topcoat Before 1 hour or after 48 hours Hard Cure 2-3 days *At 72F, 50% humidity, 1.5 mil thickness **Recoat/Cure time is extended with multiple coats and excessively warm/humid drying conditions** Gloss*: High Gloss, >80 Flat, <10 *as measured on a 60 degree gloss meter
NOTE: Due to shipping Restrictions, paint can only be sent via ground FedEx or UPS
