Product Description
Seymour Cast-Blast Specialty Coating- Gray Finish (12 oz) 16-48
A professional grade cast iron paint with metal paste inside the can that restores rebuilt engine parts to their original luster. Stops flash rusting, is highly durable.
- Up to 15 sq ft of coverage per can
- Resists heat up to 250Ëš F
- Original cast iron gray finish
- Dries to touch in 7 min
- Up to 15 sq ft of coverage per can
A professional grade cast iron paint, containing real metal material, Cast Blast will not only restore rebuilt engine parts to their original condition, but will also provide a cast iron finish to any metal component. Stops flash rusting, is highly durable and resists continuous heat up to 250°F. Should a high gloss finish be desired, Cast Blast can be topcoated with #16-121 clear. For higher temperature applications, use our Hot Spot cast iron gray, #16-2668. Compliant for sale in California.
Suggested Uses: Rebuilt cylinder heads Refinish a radiator Repair steel wheels Paint an intake manifold Metal components for a cast iron finish
Properties: Coverage Up to 15 square feet Cleanup Paint or lacquer thinner Flammability Extremely Flammable Flash point -4F Specific Gravity 0.79 Solids Content 21% MIR value 1.24, cannot exceed 1.25 HAPs content 17% Storage Temperature 40-100F Application Temperature 50-90F Hard Cure 12 hours Durability Good Abrasion Resistance Good Gasoline Resistance No Heat Resistance 250F Resin System Acrylic lacquer Shelf life Guaranteed for 2 years Dry Time*: To touch 7 minutes To topcoat 20 minutes Hard Cure 12-24 hours *At 72F, 50% humidity, 1.5 mil thickness **Curing/Recoat time is extended with multiple coats and excessively thick coats** Gloss*: Flat, <15* *as measured on a 60 degree gloss meter
Additional Information: Not for use on internal engine parts.
| Net Fill Wt. OZ: | 12 |
| Net Fill Wt. G: | 340 |
| Prop 65 (cancer): | yes |
| Prop 65 (repro): | yes |
NOTE: Due to shipping Restrictions, paint can only be sent via ground FedEx or UPS
