Presses & Accessories

GRAY BSP-10 Air 10 Ton Bench Shop Press

20,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace. The BSP-10/SP-10 features a 1.5"" diameter ram and has a two-way mountable air/hydraulic or...

GRAY BSP-10 Manual 10 Ton Bench Shop Press

20,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace. The BSP-10/SP-10 features a 1.5"" diameter ram and has a two-way mountable air/hydraulic or...

GRAY BSP-10 Safety Guard (One side)

20,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace. The BSP-10/SP-10 features a 1.5"" diameter ram and has a two-way mountable air/hydraulic or manual...

GRAY SP-10 Guard Safety Guard (One side)

20,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace. The BSP-10/SP-10 features a 1.5" diameter ram and has a two-way mountable air/hydraulic or...

GRAY SP-10 Manual 10 Ton Bench Shop Press Free Standing

20,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace. The SP-10 features a 1.5" diameter ram and has a two-way mountable air/hydraulic or manual...

Gray SP-25 Air Bench Shop Press

With the SP-25 shop press, 50,000 lbs. of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace.   The SP-25 shop press features a 2.25″ diameter ram and...

Gray SP-25 Guard Bench Shop Press

50,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace. The SP-25 features a 2.25" diameter ram and has a two-way mountable air/hydraulic or manual...

Gray SP-25 Manual Bench Shop Press

With the SP-25 shop press, 50,000 lbs. of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace.   The SP-25 shop press features a 2.25″ diameter ram and...