Lisle

Filter Wrench for 5" Davco Style Fuel Water Separators (200 Series)- Lisle 61090

Filter Wrench for 5" Davco Style Fuel Water Separators (200 Series)- Lisle 61090 Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket...

Filter Wrench for 6" Davco Style Fuel Water Separators (300 Series)- Lisle 61110

Filter Wrench for 6" Davco Style Fuel Water Separators (300 Series)- Lisle 61110 Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket...

Filter Wrench for 8" Davco Style Fuel Water Separators (400 Series)- Lisle 61130

Filter Wrench for 8" Davco Style Fuel Water Separators (400 Series)- Lisle 61130 The 480/482 series Davco separators are common on 2010-up Freightliner Cascadia's and Western Stars Specially...

Brake Chamber Cage Bolt Socket- 3/4"- Lisle 49000

Brake Chamber Cage Bolt Socket- 3/4"- Lisle 49000 Quickly Unlocks Truck Air Brakes. Extra deep 3/4" socket loosens the cage bolt to unlock air brakes on trucks. Also removes the air brake booster...

Lisle 12320 Cummins Fuel Line Socket Set- 19mm, 22mm

DESCRIPTION Designed to Replace Fuel Line Fittings on Cummins ISB and ISX engines. The sockets reduce the possibility of fuel leaks and prevent damage to fitting, fuel rail, and fuel line. The 22mm...

Lisle 12540 PACCAR MX Series Fuel Line Socket- 21mm

DESCRIPTION 12540 Line Socket, 21mm

Lisle 14500 Ford 6.0l Fuel / Oil Filter Socket- 36mm

DESCRIPTION 36mm Low Profile Filter Socket. Removes and Installs Filters on 6 Liter Ford Diesel Pickups. Works on 2017-2020 Duramax Fuel Filters.

Lisle 19852 Truck & Trailer Wheel Drain Pan

DESCRIPTION Catches Oil from Wheel Hubs After Removing Cap. Prevents oil mess during wheel repair. The pan fits rims with 13 3/4" ID and larger. Handle compartments hold hub nuts out of the oil...

Lisle 20750 Remote Starter Switch

DESCRIPTION Tough, Smooth-working Reliable Switch. Features heavy gauge, rubber-covered coper wire. Depress button to jog or start the engine.

Lisle 21350 Creeper Hanger

DESCRIPTION Can be Attached to Most Toolboxes, Benches or Walls, Keeping a Creeper Off the Floor and Stored in One Location. ABS plastic hooks can be mounted anywhere on the 24" wide rail to...

Lisle 28500 Strap Wrench- 1" to 6 5/8"

DESCRIPTION Loosen or Tighten Cylindrical or Rectangular Objects. Handy, self-tightening strap wrench won't slip. Works great for installing or removing timing belt sprockets or belt pulleys. Range...

Lisle 29120 Bendix Air Disc Brake Socket- 11pt

DESCRIPTION 11 Point Socket for Air Disc Brake Caliper Adjustment. Works on Bendix ADB 22X, ADB 225, SN6, SN7, SK7 air disc brake calipers.

Lisle 34900 Duramax / Cummins Water Sensor Wrench- 42mm, 6pt

DESCRIPTION Removes and Installs the Water Sensor Located on the Fuel Filter on 2012-2016 6.6L Duramax Diesel Engines.   The 42mm wrench works on 2013 and newer 6.7L Cummins. For use when...

Lisle 37000 Fuel / AC Line Disconnect Set

DESCRIPTION Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also...

Lisle 42400 Air Line Disconnect Set- 5pc

DESCRIPTION Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more. Set comes with five popular sizes: 1/8"-5/32", 1/4", 3/8", 1/2" and 5/8". Each tool is...

Lisle 50950 Truck Oil Filter Pliers- 3 5/8" to 6"

DESCRIPTION Slip-Joint Handle Offers a 3 5/8" to 6" Range. Large pliers fit most truck and tractor oil filters including: Case, Caterpillar, Cummins, Detroit Diesel, John Deere, Mack and other...

Lisle 52000 Razor Blade Scraper

DESCRIPTION At last, a scraper that is designed to reach in tight places. Comes with five carbon steel blades for removing stickers from windshields, bumpers, etc. Also comes with a plastic...

Lisle 53100 1/2" Drive Adjusable Filter Wrench- 4 3/8" to 5 5/8"

DESCRIPTION For Trucks and Tractors. Fits John Deere, Case, Caterpillar, Mack, Detroit Diesel and others. Tough, stainless steel band with special "teeth" for extra gripping power...won't slip...

Lisle 53200 Swivel Grip Filter Wrench- 4 3/4" to 5 3/16"- John Deere, Case, IHC, Allis Chalmers

DESCRIPTION Heavy-Duty "Swivel Grip." Range 4 3/4" to 5 3/16". This filter wrench fits most John Deere tractors. Also works on some Case, Case/IHC, Allis Chalmers tractors and other farm implement...

Lisle 53250 Swivel Grip Filter Wrench- 4 1/8" to 4 1/2"

DESCRIPTION Handle Swivels to Clear Obstructions. Features the swivel handle, gripper "teeth" and 1" wide stainless steel band. The swivel handle makes it easy to turn filters in hard to reach...

Lisle 53400 3/8" Drive Filter Wrench- 3"

DESCRIPTION Remove and Install All 3" Filters. Works in the tightest spots. Stainless steel band, gripper teeth...won't slip. 3/8" square drive.  

Lisle 53500 Swivel Grip Filter Wrench- 3 1/2" to 3 7/8"

DESCRIPTION Handle Swivels to Clear Obstructions. Features the swivel handle, gripper "teeth" and 1" wide stainless steel band. The swivel handle makes it easy to turn filters in hard to reach...

Lisle 53700 Swivel Grip Filter Wrench- 2 7/8" to 3 1/4"

DESCRIPTION Handle Swivels to Clear Obstructions. Features the swivel handle, gripper "teeth" and 1" wide stainless steel band. The swivel handle makes it easy to turn filters in hard to reach...

Lisle 53900 Filter Wrench- 3-1/2" to 3-7/8"

DESCRIPTION Straight Handle Filter Wrench. 1" stainless steel band with special "teeth" grips tightly. Vinyl-covered handle provides firm, comfortable grip. Range 3-1/2” to 3-7/8”...

Lisle 54200 Filter Wrench- 4 5/16" to 4 3/4"- Detroit, Cummins

DESCRIPTION For Truck Size Filters. "Swivel Grip" handle makes it easy to turn in tight spots! Tough, stainless steel bands with special "teeth" for extra gripping power...won't slip. Handles made...

Lisle 54300 Filter Wrench- 5 1/4" to 5 3/4"- Caterpillar

DESCRIPTION For Truck Size Filters. "Swivel Grip" handle makes it easy to turn in tight spots! Tough, stainless steel bands with special "teeth" for extra gripping power...won't slip. Handles made...

Lisle 59800 Serpentine Belt Tool

DESCRIPTION Releases Tension on Serpentine Belts With a Spring Loaded Idler Pulley. Supersedes #57900 This tool is used to remove and install belts on serpentine belt systems using the spring...

Lisle 60200 1/2" Drive Heavy Duty Strap Wrench- up to 6 1/2"

DESCRIPTION A Heavy-Duty, Heat Treated Alloy Steel Yoke and Strong Web Strap. Use with 1/2" drive to remove or install filters and other objects up to 6-1/2" in diameter. 3-5/8" long yoke fits into...

Lisle 63500 "Big Range" Strap Wrench- up to 6"- 1/2" or 3/4" Drive

DESCRIPTION For Filters Up to 6" (152.4mm). Adjusts quickly to fit any spin-on oil filter up to 6" diameter. Use with 1/2" drive or 3/4" wrench. Strong nylon belt.

Lisle 65250 Universal Bearing Packer

DESCRIPTION Fast, Efficient, Thorough. Simply place the bearing between the plastic cones, tighten, and apply grease through the fitting on the end of the threaded shaft. Forces out old grease and...

Lisle 83400 Truck Brake Lining Gauge Set

DESCRIPTION The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing. Designed to check both straight on or at a 90° angle to the...

DEF Line Disconnect Set- Lisle 38410

DEF Line Disconnect Set- Lisle 38410 Low Profile Compact Design Allows Easy Access to Hard-To-Reach DEF, Breather Line, Coolant Line, and Fuel Line Connectors Found on Most Cars, Truck and...

Lisle 13410 Brake Caliper Brush

Lisle 13410 Brake Caliper Brush Cleans Rust from Brake Caliper Mounting and Other Surfaces. Removes brake dust, rust and other debris from brake caliper castings. Brush is made with heavy-duty...

NOX Sensor Thread Chaser M20x1.5- Lisle 12220

NOX Sensor Thread Chaser M20x1.5- Lisle 12220 Cleans Threads in NOx Sensor Holes. Use with 13/16" hex socket or 3/8" square drive to restore M20x1.5 NOx sensor threads.

Oxygen Sensor Thread Chaser M18x1.5- Lisle 12230

Oxygen Sensor Thread Chaser M18x1.5- Lisle 12230 Cleans Threads in Oxygen Sensor Holes. Use with 3/4" hex socket or 3/8" square drive. Size: M18x1.5 Also works on M18x1.5 spark plug threads...

Oxygen Sensor Thread Chaser M18x1.5- Lisle 12231

Oxygen Sensor Thread Chaser M18x1.5- Lisle 12231 Removes and Installs Oxygen Sensors on Most Domestic and Some Imports. Special 22mm socket with cutaway slot to provide clearance for wire...

Lisle 53050 5" Wide Band HD Filter Wrench

Lisle 53050 5" Wide Band HD Filter Wrench 5" HD Filter Wrench. 3" Stainless Steel Band Provides Secure Grip. Heavy Duty Design for Durability and Strength. Use with 1/2" square drive ratchet or...

Lisle 53090 5 1/2" Wide Band HD Filter Wrench

Lisle 53090 5 1/2" Wide Band HD Filter Wrench 5-1/2" HD Filter Wrench, 3" Stainless Steel Band Provides Secure Grip. Heavy Duty Design for Durability and Strength. Use with 1/2" square drive...

Magnetic Glove Dispenser- Lisle 20130

Magnetic Glove Dispenser- Lisle 20130 Magnetic glove dispenser conveniently attaches to your toolbox or any ferrous metal surface. Two large magnets hold the dispenser in place. Or, mount it on a...

Lisle 41850 Brake Clevis Pin Press

Lisle 41850 Brake Clevis Pin Press Spring-Loaded Plunger Automatically Centers the Press on the Brake Clevis Pin, for Easy Removal. Tool is designed to shear off the cotter pin, or the cotter pin...

Lisle 41840 Slack Adjuster Rod Pin Press

Lisle 41840 Slack Adjuster Rod Pin Press Spring-Loaded Plunger Automatically Centers the Press on the Slack Adjuster Rod Clevis Pin, For Easy Removal. Tool is designed to shear off the cotter pin,...

Lisle 64180 Actuator Motor Wrench Set 5pc

Lisle 64180 Actuator Motor Wrench Set 5pc Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors. These motors control...

Lisle 50750 Oil Filter Pliers- 2 1/4" to 4"

Lisle 50750 Oil Filter Pliers- 2 1/4" to 4" Slip Joint Handle for Greater Range. Two-position, slip-joint handle produces the range of three separate conventional filter wrenches. Overall range 2...

Lisle 57850 Battery Carrier

Lisle 57850 Battery Carrier Lift and Carry Batteries Safely. Sturdy steel jaws securely hold batteries. Spring-action handle turns lifting power into battery gripping pressure. Form-fitting handle...

Lisle 37980 Electrical Disconnect Pliers, 60 Degree

Lisle 37980 Electrical Disconnect Pliers, 60 Degree Angled Tips for Easier Access to Hard-to-Reach Connectors. Easily removes locking push tab style electrical connectors found on mass air flow...

Lisle 29200 3/8" Hand Impact Tool Set

Lisle 29200 3/8" Hand Impact Tool Set Loosens Rusted, Frozen Nuts, Bolts and Screws. Unique design delivers over 200 ft. lbs. of "Shock Torque." Can be reversed to tighten. Can also be used with...

Lisle 14900 Terminal Disconnect Tool for Packard Plugs

Lisle 14900 Terminal Disconnect Tool for Packard Plugs Eliminate Damaged Wires and Terminals. Lisle Wire Terminal Tools are designed to remove wires from terminals without damage to either. 14900...

Lisle 13280 Dodge / Cummins Fuel Filter Socket- 25mm Low Profile

13280 25mm Low Profile Filter Socket 25mm Low Profile Filter Socket Applications: Fleetguard Filter on Motorhomes, Buses, and Some Medium Size Trucks with Cummins Engine. Also Some K&N Filters.

Lisle 13290 Dodge / Cummins Fuel Filter Socket- 28mm Low Profile

13290 28mm Low Profile Filter Socket 28mm Low Profile Filter Socket Application: 2010-Current, 6.7L Dodge Cummins fuel filter cannister

Lisle 14600 Cummins Fuel Filter Socket- 29mm Low Profile

14600 Fuel Filter Socket Dodge Cummins 29mm 29mm Low Profile Filter Socket. Helps Remove and Install Fuel Filters on 5.9 Liter Cummins Engines. Use the low profile, 29mm socket on the raised hex on...

Lisle 13340 DEF Filter Socket, 46mm

13340 DEF Filter Socket, 46mm Removes and Installs DEF Canister Filters on Many Class 6-8 Trucks. Can also be used on DEF filter caps found on Mercedes-Benz BlueTEC engines. 3/8" Drive. Not...

Lisle 12180 Soot Sensor Thread Chaser- M22 x 1.5

12180 Soot Sensor Thread Chaser M22 x 1.5 Cleans Threads in Soot Sensor Holes. Use with 7/8" hex socket or 3/8" square drive. Important: Use anti-seize.